 |
|
|
|
|
|
|
|
FRONT SUSPENSION |
|||
|
Front Hub - Left Front Hub - Right |
$ $ |
1015.00 1015.00 |
|
|
Front Hub Stud - Chrome Moly | $ | 42.50 |
|
|
Front Hub Stud Washer | $ | 2.65 |
|
|
|||
|
|
Retaining Ring | $ | 1.50 |
|
|
Hub
Retaining Spring Stainless |
$ |
24.90 |
|
|
Front Upright Pin - Upper | $ | 47.50 |
|
|
Front Upright Pin - Lower | $ | 50.00 |
|
Washer for Upright | $ | 10.75 |
|
Wheel Bearing - Front 6010 |
$ |
16.50 |
|
|
Spherical Bearing Front upper camber link to upright 1-5/16" O.D. x 1/2" I.D. |
$ |
62.00 |
|
|
Spherical Bearing Front lower wishbone to upright 1-9/16" O.D. x 5/8" I.D. |
$ |
61.60 |
|
|
Spacer - Inner Bearing to Circlip (Plated) | $ | 9.95 |
|
|
Spacer - Outer Bearing to Hub (Plated) | $ | 19.75 |
|
REAR SUSPENSION |
|||
|
|
Rear Hub - OBB | $ | 585.00 |
|
Rear Hub - Left Rear Hub - Right |
$ $ |
755.00 755.00 |
|
|
Rear Hub - IBB | $ | 585.00 |
|
Wheel Stud - 3.00" Wheel Stud - 3.25" Wheel Stud - 3.75" Wheel Stud - 4.31" All studs are Chrome-moly with rolled threads |
$ $ $ $ |
18.35 15.25 Inquire 15.25 |
|
|
Rod, Lower Wishbone B19-B23 | $ | 18.80 |
|
|
Rod, Lower Wishbone B26-B36 | $ | 23.45 |
|
Lug Nut Assembly Two piece w/ floating flange |
$ |
6.50 |
|
|
|||
|
|
Rear Suspension Insert - Early | $ | 19.95 |
|
|
Rear Suspension Insert - Late | $ | 19.95 |
|
|
Rear
Suspension Washer B19 - B23 |
$ |
Inquire |
|
|
Rear
Suspension Washer B26 - B29 |
$ |
Inquire |
|
|
Universal Joint - w/
grease fitting Hardy Spicer - 1300 Series |
$ | 24.50 |
|
Universal Joint - w/o grease fitting Hardy Spicer - 1300 Series |
$ | Inquire | |
|
Universal Joint - w/o grease fitting Hardy Spicer - 1310 Series |
$ | 40.00 | |
|
|
Clevis Bolt Measurement | ||
|
|
Upper
Clevis Bolt -
Eccentric 1/2 - 20 UNF Thread Length - 3.750" |
$ |
140.00 |
|
|
Upper
Clevis Bolt 1/2 - 20 UNF Thread Length - 3.750" |
$ |
120.00 |
|
Spherical Rod End 3/8" Diameter 5/8 - 18 UNF Thread |
$ |
89.35 |
|
Yoke - External Spline | $ | 195.00 |
|
C/V Joint Flange - Splined | $ | 150.00 |
|
Wheel Bearing - Front & Rear 6011 |
$ |
32.75 |
|
ENGINE |
|||
|
|
Bushing, Engine Mount 7/16 I.D. x 1 O.D. x 1-3/8 Long |
$ |
15.05 |
|
WHEELS |
|||
|
|
Wheel Stud Nut | $ | 8.50 |
|
Wheel Nut - Left
(Red) Wheel Nut - Right (Green) |
$ $ |
Inquire Inquire |
|
Wheel Drive Peg | $ | 2.90 |
|
STEERING |
|||
|
|
Steering Rack Locking Washer | $ | 5.45 |
|
|
Ball Joint, Steering Arm | $ | 21.75 |
|
Steering Rack | $ | 185.00 |
|
Steering Rack Bellows - Left Steering Rack Bellows - Right |
$ $ |
16.50 16.50 |
|
BRAKE |
|||
|
Brake Rotor Top Hat | $ | 162.50 |
|
|
Brake Rotor Top Hat (C/V Joint) | $ | 175.00 |
|
|
Brake
Rotor - Specify Diameter Available in 10", 10-1/8", 10-1/4" and 10-1/2" Unidirectional, Gas Vents, Stress Relieved |
$ |
135.00 |
|
AR Caliper Less pads |
$ |
695.00 ea |
|
|
Caliper Piston - AR | $ | 23.25 |
|
|
O-Ring, Caliper Piston - AR | $ | 11.50 |
|
|
Brake Pad Retainer - Stainless | $ | 5.00 |
|
Balance Bar Assembly Individual pieces available |
$ |
126.00 |
|
|
|||
|
|
Balance Bar Clevis | $ | 32.50 |
|
|
|||
|
|
Click on Balance
Bar Assembly drawing to see larger view. (Use browser back button to return). |
||
|
MISCELLANEOUS |
|||
|
|
Chevron Decal | $ | 16.00 |
|
|
Chevron Embroidered Emblem | $ | 19.00 |
| Most parts are aftermarket
reproductions and no inference is intended that any were manufactured by the original
manufacturer. |
|||
| To Chevron wheels |
|||
 Return to Homepage |
|||
